The VAMO introduces the latest technology in electronic PV with VARIABLE POWER (WATTAGE) at a fantastic price point.It shouldn't have any problems with it's solid 510-connector and Stainless Steel Body.
In the new Variable Wattage mode the VAMO will adjust voltages automatically to suit the resistance of your atomizers/coil heads (above 1.2 ohms). The Vamo has a 1.2 ohm cut off feature.
The VAMO is also able to switch between Mini and Standard mode without the need to purchase any additional items, it came with additional tube allow user to choose what batteries to use, it also loaded with all the safety features and high specifications required of an Advanced Personal Vaporizer (Mod).
- Full Metal body and buttons
- Variable Volt: 3~6.0V,
- Variable Watt: 3~15W.
- Dual Size: 2-in-1 Mini/Standard Size
- PWM (Pulse Width Modulation) output, up to 5 amps
- 5 click on/off
- Multiple battery options (1 x 18650, 1 x 18350)
- Reverse and short protection
- Low resistance and low battery warning
Turn On or Off:
Press the Power (large) button 5 times within 2 seconds.
Switch between VV and VW:
Press and hold + and - buttons for 3 seconds (v for volts, w for Watts).
Tap the + or - buttons to raise or lower output voltage (in 0.1 volt increments).
Tap the + or - buttons to raise or lower output wattage (in 0.5 watt increments).
With an atomiser or cartomiser installed on unit, press and hold the "+" button for 2 seconds. Atomiser resistance is displayed in ohms.
Battery voltage check:
Press and hold the "-" button for 2 secs to check actual battery voltage.
The Vamo can display output voltage and wattage as an Average or as RMS (Root Mean Square). RMS is the actual and true output and is the one to use.
Press and hold the + button for 10 secs. If no2 is shown then the output is already set to RMS, no further action is required. If no1 is shown, release the button and press again for 10 secs until the display shows no2. This setting should not alter after a battery change, however if the vape feels warmer than expected please re-check setting.
LO-Ω : Atomiser resistance is too low (below 1.3 ohm).
LO-v : Atomiser shorted
Display will flash when battery needs replacing/recharging (approx 3.4v).
Voltage or wattage level resets when battery is removed, the mode does not.
- 1 x Stainless Steel VAMO body with extended tube.
- 2x CE4
- 1 x 18350 3.7v (900mAH) IMR Battery Cell + 1x 18650 battery
- 1 x Multifunction Dual-Slot Charger
- 1 x VAMO Instruction Manual
- Vamo box
This product comes with a 5 days parts replacement warranty for manufacturing defects.
**Warranty does not cover atomizers, cartomizers, clearomizers, tank cartridges**